What are the steps of disassembly and maintenance of the micro switch in the mouse, and how to operate it? Let's give you a detailed introduction.
Micro-switch is a kind of contact mechanism with small contact spacing and fast-acting mechanism, which uses prescribed stroke and force to carry out switching action. It is covered by a shell. There is a kind of switch with driving rod outside. Because the contact spacing of the switch is relatively small, it is called micro-switch, also known as sensitive switch.
Mouse micro switch disassembly step
1. Prepare a tool to pry the mouse micro-switch first. You can use the front end of the fine wire to flatten it for later use, try to grind it thinner, or use a thin blade or bamboo toothpick as a tool to pry the micro-switch.
2. The side of the mouse microswitch is next to other components. It is not easy to remove it. Usually, one side of the mouse microswitch is non-component occlusion, so it is necessary to pry it from this side first.
3. Before disassembly, observe carefully. There are two clips on the micro-switch, and the micro-switch is firmly stuck. You have to use a toothpick to press the clip of the micro-switch inside, and then pick it up gently from the bottom gap of the micro-switch.
4. When taking the cap of the micro-switch, do not exert excessive force. One side of the cap should fall off. Then the cap can be removed by inserting a micro-switch from the detached side with a straightened paper clip and lightly touching the clip on the opposite side.