吉祥wellbet网页版-wellbet手机版下载

CLASSIFY
Industry information
Location:Home > English > News > Industry information >
Introducing the Problems Needing Attention in Using Dial Switch

Release time:2019-08-22    Clicks: Click

 
What problems should we pay attention to when using the switch? We will give you a detailed introduction here.
吉祥wellbet网页版
In our life, most of the electrical appliances such as audio equipment, electric toys and so on will use the toggle switch. The main function of the toggle switch is to put different forces on the switch handle to realize the connection and disconnection of the circuit. It is simple to use, so it is widely used. After the continuous development of science, now the main types of switches are two, three, four, reset and other functional switches. Switches can be selected according to different needs. In addition, no matter which gear has the characteristics of flexible movement, stable and reliable performance, it can be used in digital products, instrumentation equipment, fax machines, medical equipment, electric toys and other electronic products.
When using the switch, the following points should be paid attention to:
1. When welding terminals, loading terminals will result in loosening, deformation and reduction of electrical characteristics according to different conditions.
2. Avoid using water-soluble flux when welding because it may cause corrosion of switch.
3. Regarding the setting of welding conditions, please proceed according to the actual batch production conditions.
4. When soldering tin twice, please return the first soldering part to normal temperature before proceeding. If heated continuously, it is possible to deform the periphery, loosen the terminals, drop off and reduce the electrical characteristics.
5. Please don't let flux flow to the switch from around the printed circuit board.
6. After installing the switch, in order to harden the binder of other parts, please contact us when passing through the regenerative hardening furnace.
7. When using through-hole PCBs and PCBs other than those recommended, due to the change of thermal stress, please confirm the welding conditions in advance.
8. With pin type, please weld at the pin position. If the midpoint of the pin is fixed for welding, the pin mechanism may be deformed.
9. Can't clean. When the terminal is welded, the load is applied to the terminal, which may cause loosening, deformation and reduction of electrical characteristics according to different conditions.
Product display
Click here to send me a message

吉祥wellbet网页版|wellbet手机版下载

XML 地图 | Sitemap 地图