Introduction of Test Method for Using Light Touch Switch
Release time：2019-07-11 Clicks： Click
When using the light touch switch, we need to test. What is the specific method to test? Let's give you a detailed introduction.
Touch the switch, that is, by pressing the button to make the circuit on or off.
Waterproof light touch switch is a switch that can be washed in water or rain without failure. Generally, the waterproof switch is IP67, which means that it can completely protect the dust in the air. At the same time, it can be in the position of about 1M underwater, at room temperature, about 30 minutes will not be damaged.
Water-proof light touch switch sprinkler test environment
Sprinkler Sprinkler Test Equipment: Handheld Sprinkler Test Equipment
Sample placement: the parallel distance between the top of the test and the nozzle of the hand-held sprinkler is between 300 mm and 500 mm.
Test conditions: The baffle with balanced weight should be installed during the test, and the water flow rate is 10L/min.
Test time: According to the surface area of the tested sample shell, it is 1 minute per square metre (excluding installation area), with a minimum of 5 meters.